Product Description

1.Product overview

Dry-type transformers need to be equipped with dry-type transformer temperature controller and terminal box, customers need to purchase separately, and installed in different locations, the process is slightly cumbersome. BWDK-3206A series of dry-type transformers temperature controller integrated dry-type transformer temperature monitoring, terminal box and other expansion features, so that customers experience better, more convenient installation. 

2.Functional features

Temperature monitoring of dry-type transformer: three-phase circuit measurements and display; the maximum display; input open circuit and failure self-inspection display and output; cooling draught fan manual/automatic start-stop display and output; over-temperature alarms, over-temperature trip display and output; displayed value compensation of all channels; "black box"; control for timing start-stop of the draught fan; Temperature simulation. The full series uses the principle of number uniqueness to define input& output terminal functions, in order to facilitate the client drawing design, field wiring and control box change. Communication/simulation current is output from the terminals, no need to the intermediate conversion terminal. For the sensor cable interface, the front-end installation method is adopted to provide easy installation for clients.

Terminal box: Air switches and a certain number of terminals will be added and sufficient space will be reserved for wiring, in order to achieve the functions of the terminal box.

Extended functions: Monitor and control the ambient temperature and humidity as ll as carry out relevant functional expansion based on client demands.

3.Type selection (any combination between E, F, G, I and C)

BWDK-3206A –  X  X   X  /T
	X				0: Custom 1: DC24 2: AC220V 3: AC380V 5: AC85~265V/DC110~300V
		X			D: General functions E:  D + 4 ~ 20mA current output F:  D + RS485 communication G: D + 1 ambient temperature measurement and control I: D + 1 Temperature measurement and control of iron core C: D + PTC interlock control over overtemperature alarm (optional) overtemperature trip (optional)
			X		Number of spare terminals
				X	Empty: no special function T: Contain special

 

4.Basic technical parameters

Ambient temperature (℃)：-20～55

Relative humidity (%RH)：< 95 (25℃)

Measurement range(℃)：-30.0～240.0

Sensor type：Pt100 (Three-wire)

Power frequency (Hz)：50/60(±2)

Power voltage (V)：AC220 (-15%，+10％)

Power consumption of controller (W)：≤8

Resolution(℃)：0.1

Contact capacity：Fan: 6A 250VAC (cosφ=0.4) 

Other: 5A 250VAC/5A 30VDC (resistive)

Accuracy grade：Grade 1 (controller: grade 0.5; sensor: grade B)

Conforming to the relevant standards：JB/T7631-2016，ISO9001:2008，IEC61000-4:2002，GB/T17626-2008

Dimension (mm)： Opening222+1×312+1 Appearance240×345×95

 

Product Image