1, the main features
▲ dual 4 LED display, so that the working status of temperature control and measurement value display more intuitive.
▲ adjusted using the I2C and storage technology, data protection save power.
▲ manual / automatic fan start and stop.
▲ with over temperature alarm, over temperature trip, fan start and stop functions.
▲ with 4-20mA analog current output and RS-485 communication.
Second, model and features
|
Type
|
Function
|
|
Type D
(Ordinary type)
|
Three-phase circular measurement; Three-phase circular display/maximum value display and mutual switching between two functions; Input disconnection and trouble self-check display and output; Auto start and stop of cooling fan and output; Over-temperature alarm display and output; Over-temperature tripping display and output; Display of manual/auto modes of fan, output and mutual switching; Digital compensation for value displayed in each channel; Function of "black box"; Timed start, stop and control function of fan; Detection of output status.
|
|
Type E
|
The same as Type D, with addition of 4~20mA analogue current output.
|
|
Type F
|
The same as Type D, with addition of RS485 serial communications function.
|
|
Type G
|
The same as Type D, with addition of one-way transformer room temperature measurement and control.
|
|
Type I
|
The same as Type D, with addition of one-way transformer core temperature measurement and alarm.
|
|
Type L
|
The same as Type D, with addition of protection and alarm function for lack of phase and failure of fan.
|
|
Type C
|
The same as Type D, with addition of interlock control of Pt100
and PTC on over-temp alarm and over-temp trip signal.
|
Note: Oth requirements for the temperature controller should be indicated when placing orders.
Note: If the above model, add "P", said the terminal is the active control of fan.
Third, for occasions
▲ applicable to a variety of small dry-type transformers and European box changes
▲ choose folder installed in the transformer body parts or the casing
▲ transformer cooling fan starting current up to 7A
Fourth, technical indicators
Sensor type: Pt100 (ф4 × 40)
Range :0.0-200 .0 ℃
Accuracy: ± 2.0 ℃
Operating frequency: 50Hz or 60Hz
Voltage: AC 220V
Dimensions: 80mm × 160mm × 80mm (H × W × D)
Hole Size: 76 +1 mm × 152 +1 mm (H × W)
On the common-mode AC 250V AC 200mV or series mode interference voltage on the frequency of 5KHz, voltages were 2KV (supply side) and 1KV (input / output) and electrical fast transient, on 4KV ESD, the frequency of 80 ~ 1000MHz, field strength 10V / m electromagnetic field radiation, the instrument error of indication and control of additional standards are met.
